The CLB and HBA range of co-extrusion machines are suitable for producing multi-layer products from small bottles up to 220 litre L ring drums.
The HBA series is available with single die head and single or double clamp stations, for production of containers up to 30 litres with two layers.
The CLB series are single die head with double clamping stations, suitable for larger containers with two or three layers.
Co-extrusion machines allow good use of regrind material and lower quantities of virgin material. Master batch usage can also be reduced without compromising the quality and appearance of the product.
All machines are built to ISO 9001-2000 standards and CE certified.
Machines can be supplied to meet your specific technical and performance requirements.
- Powered extruder position adjustment
- High range helical gearbox with speed control
- Barrier flight screws and grooved feed zone for high mixing capacity and optimun processing
- Independent hydraulic systems for clamping and injection
- Extrusion head with special channel design for smooth and even flow, giving stable layer distribution and easy wall thickness adjustment
- Automatic deflashing unit with residue chute
- Double clamp units on linear rack bearings
- All lnear bearings have self lubrication
- Hydraulic closed loop proportional valves
- Easy acces for mould changes by just moving away the blowing pin
- Clamping stroke controlled by proportional valve and accumulator
- Maco 6000 controller with 100 point parison thickness control and servo valve achieves very high quality
- Double station clamping units optional on HBA series
- Finished product conveyor
- In-line post cooling units can be added to decrease the machine cycle time
- In line weight balance
- In-line leak detectors can also be combined for total quality control
- Residue recycle granulator with feed back to extruder hopper
- Gravimetric 3 or 4 component auto-dosing systems
- Air compressor, dryer, separator, filters
- Water chiller
- Material drying and conveying systems
| Model | Units | CLB-130/130-SDG Two Layer | CLB-100/130/100-SDG Three Layer |
|---|---|---|---|
| Product Size | litres | 120 - 220 | 120 - 220 |
| Extruders | A= Inner, C=Outer | A= Inner, B=Middle, C=Outer | |
| Screw Diameter | mm | A 130, C 130 | A 100, B 130, C 100 |
| Screw L/D | mm | A 30, C 30 | A 30, B 30, C 30 |
| Main Drive | hp | A 250, C 250 | A 150, B 250, C 150 |
| Barrel Cooling | hp | A 1/2 x 5, C 1/2 x 5 | A 1/2 x 5, B 1/2/ x 5, C 1/2 x 5 |
| Heating Zones | qty | A 5, C 5 | A 5, B 5, C 5 |
| Barrel Heating Capacity | kw | A 58, C 58 | A 32, B 58, C 32 |
| Extrusion Capacity | kg/hr | 650 - 700 | 650 - 700 |
| Die Head Multi Layer | |||
| Heating Zones | qty | 5 + 2 | 5 + 2 |
| Heating Capacity | kw | 115 | 103 |
| Max Die Lip Diameter | mm | 320 | 320 |
| Clamping Unit | LK1413 Double Station | LK1413 Double Station | |
| Clamping Force | tons | 70 | 70 |
| Clamping Distance | mm | 600 - 2000 | 600 - 2000 |
| Mould Platen Height | mm | 1400 | 1400 |
| Mould Platen Width | mm | 1360 | 1360 |
| Hydraulic Unit | High and Low Pressure Circuit with Accumulator | High and Low Pressure Circuit with Accumulator | |
| Pump Drive | hp | 30 + 15 / 10 + 2 | 30 + 15 / 10 + 2 |
| Max Clamping Pressure | kg/cm2 | 180 | 180 |
| Max Programmer Pressure | kg/cm2 | 160 | 160 |
| Utilities | |||
| Air Consumption | m3/hr | 200 - 250 | 200 - 250 |
| Air Pressure | kg/cm2 | 6 - 8 | 6 - 8 |
| Total Connected Power | kw | 640 | 720 |
| Average Power Consumption | kw/hr | 385 | 430 |
| Mould Chilled Water | litres/min | 320 | 320 |
| Cooling Water | litres/min | 210 | 210 |
| Dimensions (LxWxH) | m | 13.4 x 9.6 x 5.5 | 12.2 x 11 x 6.7 |
| Model | Units | HBA55G/55GVT06SS Single Clamp | HBA65G/55GVT06SD Double Clamp | HBA65G/65GVT30SS Single Clamp | HBA75G/75GVT30SD Double Clamp |
|---|---|---|---|---|---|
| Max Product Size | litres | 6 | 6 | 30 | 30 |
| Extruders | A= Inner, C=Outer | A= Inner, C=Outer | A= Inner, C=Outer | A= Inner, C=Outer | |
| Screw Diameter | mm | A 55, C 55 | A 65, C 55 | A 65, C65 | A 75, C 75 |
| Screw L/D | mm | A 30, C 30 | A 30, C 30 | A 30, C 30 | A 30, C 30 |
| Main Drive | hp | A 40, C 40 | A 60, C 40 | A 60, C 60 | A 75, C 75 |
| Barrel Cooling | hp | A 1/4 x 3, C 1/4 x 3 | A 1/4 x 4, C 1/4 x 3 | A 1/4 x 4, C 1/4 x 4 | A 1/2 x 4, C 1/2 x 4 |
| Heating Zones | qty | A 3, C 3 | A 4, C 3 | A 4, C 4 | A 4, C 4 |
| Barrel Heating Capacity | kw | A 11, C 11 | A 18, C 11 | A 18, C 18 | A 18, C 18 |
| Extrusion Capacity | kg/hr | 130 | 180 | 250 | 300 |
| Die Head Multi Layer | |||||
| Heating Zones | qty | 3 + 2 | 3 + 2 | 3 + 2 | 3 + 2 |
| Heating Capacity | kw | 17 | 17 | 35 | 36 |
| Max Die Lip Diameter | mm | 150 | 150 | 260 | 260 |
| Clamping Unit | T06 | T06 | T30 | T30 | |
| Clamping Force | tons | 10 | 10 | 30 | 30 |
| Clamping Distance | mm | 158 - 546 | 158 - 546 | 480 - 1000 | 480 - 1000 |
| Mould Platen Height | mm | 470 | 470 | 720 | 720 |
| Mould Platen Width | mm | 450 | 450 | 550 | 550 |
| Hydraulic Unit | |||||
| Pump Drive | hp | 25 + 2 / 7.5 | 30 + 2 / 7.5 | 30 + 2 / 7.5 | 40 + 3 / 7.5 |
| Max Clamping Pressure | kg/cm2 | 180 | 180 | 180 | 180 |
| Max Programmer Pressure | kg/cm2 | 160 | 160 | 160 | 160 |
| Utilities | |||||
| Air Consumption | m3/hr | 50 - 70 | 115 - 135 | 115 - 135 | 235 - 265 |
| Air Pressure | kg/cm2 | 6 - 8 | 6 - 8 | 6 - 8; | 6 - 8 |
| Total Connected Power | kw | 100 | 120 | 200 | 210 |
| Average Power Consumption | kw/hr | 60 | 75 | 120 | 130 |
| Mould Chilled Water | litres/min | 120 | 160 | 160 | 240 |
| Cooling Water | litres/min | 50 | 80 | 90 | 150 |
| Dimensions (LxWxH) | m | 5.4 x 4.2 x 3.6 | 5.4 x 5.9 x 3.8 | 7.2 x 6.6 x 4.7 | 7.4 x 9.4 x 4.7 |
BME International s.r.o.
K Cihelnam 72
Plzen 32600
Czech Republic
